Muffler ordered

Watching about 3 hours of the Rolex 24 hours of Daytona.  Exciting stuff.  Back to the SV:

I decided to go with an M4 slip-on for the exhaust for several reasons. Looked good in pictures, even close-up high-res, made in the USA, and the price (and service) was good from Blair at svracingparts. I probably would have been happy with the cheaper Delkevic too, but I made my choice and there's no point in looking back! ;-)

Also have a rear hugger coming in from another svrider.com member so if it all comes in this week I'll be riding AND wrenching next weekend!

Non-productive weekend

Saturday was jam-packed with family activities so I figured I would do some work in the garage on Sunday while it rained.  I slept until after 9:30 then after taking care of a couple of things we headed out to lunch.  Then on the way back we went to visit a friend who was having an open house for a customer.  By the time we got back it was after 3pm so I good part of the day was gone already. 

I figured I still had time to flush the coolant and maybe put on my techspec tank grips.  However, it wasn’t quite as warm as it needed to be.  It should be 80 and it was only 70 in the garage so I grabbed an old hair dryer to heat up the sides of the tank.  But the tank is full of gas so I was fighting a losing battle with a tank full of 4.5 gallons of cold fuel.  I was able to heat up the rear of the tank enough though to put the part on that protects it from snaps, zippers, and buckles.  Plus it was a single curve instead of the triple compound curve on the sides of the tank and would be easier to match the curves and stick.  So I got that attached and it’s already past 4pm.  Well, I have something to go to at 6 tonight and I still hadn’t watched any of the Rolex Sports Car Series at the 24 hours of Daytona that I had recorded so I decided to stop right there and just go relax. 

The rain that was forecast for almost all day stopped shortly after lunch and the sun started to come out, so I just left the SV outside.  I’ll ride it to the 10 West meeting tonight to put a few more miles in the saddle.  It looks like another warmer day tomorrow, so maybe I’ll even ride it to work even though that means carrying my computer in a backpack.  I’ll decide in the morning.  The luggage on the VFR may just look too easy to pass up.

Enjoy the rest of the weekend.  I’m watching racing.

3M Protective Headlight film is on

• 3M headlight film - done

3M film was pretty easy, less than 5 minutes for each side.  No multiple curves on the lenses like the VFR.  That one was a pain to do.  And I put gas in it for the first time.  Had 102 miles on the tank and it held 1.88 gallons for about 54 mpg.  I dumped in some SeaFoam and B12 to help clean stuff up since I didn't know how long the original gas had been in it. 

I also finally had an extra key made as it only had 1.  Tried an Ace Hardware but their Suzuki key wasn't long enough.  It would open the tail, but not turn the ignition.  A locksmith about 2 streets down made one in about 60 seconds and it worked perfectly. 

While running errands I did about 25 miles today and took a couple of 90-degree curves labeled "15 mph".  30 mph entry and 35 mph exit were light and easy, even with only 40 miles on the BT-016 Bridgestones.  Going from the VFR to the SV is like trading a butcher knife for a scalpel.  Now if I could only get it out for a real ride outside of town.  The temps are fine in the Houston area but it seems it rains every time I'm free and I want dry roads while I'm learning how this new machine handles.

First Fill Up

I had over 100 miles on the odometer since getting the SV.  It also had the same gas it had when I picked it up and I had no idea how old that gas was.  So, I stopped to fill it up with 89 octane.  87 is the minimum but I decided to put in 89 to try to make up for any staleness of the old fuel in the tank.  I started filling it up and it stopped pretty quickly.  I turned around to put the hose up and saw that it had only taken 1.88 gallons for the 4.6 gallon tank.  I did the math and that comes out to a mileage of about 54 mpg.  I was impressed. 

I also had some SeaFoam and Berryman B-12 with me in my tank bag, and I put a couple of ounces of those in the tank too.  That combo should take care of just about anything wrong with the fuel from moisture, staleness, and fuel injector cleaning.

Overall I’m still impressed with this “little” motorcycle so far.  It’s more spirited than the VFR and as I get the tires scrubbed in I’m starting to take corners more aggressively.  I can tell it still doesn’t have a cutting-edge suspension and neither does the VFR, but the light weight still makes it feel better than the VFR in a corner.  I still need to get it out on the road for a good weekend ride, but the weather just isn’t wanting to cooperate lately on the weekend when I have free time.  It looks like this will be the case tomorrow and Sunday too.

A Good Surprise

I got a good surprise today.  I received my Motorcycle Owner’s Manual (MOM) and the service manual as expected.  I took a minute to flip through the MOM and saw that there was a section called Tool Kit.  Well, wouldn’t you know it… There was a tool kit hidden on the bike! 

There was a rectangular section kind of below and behind the battery down in the sub-frame.  I had seen it before just figured it was part of the battery section where the fuses and other electronics came together.  After seeing it in the MOM, I saw there there was a little pull knob that I hadn’t see before because it was behind the frame.  I pulled on it and a little door popped off and I could see a small bag filling the compartment.  I pulled the bag out and there was a full tool kit!  There was the spanner that I was needing to adjust the rear shock pre-load, and all sorts of other stuff like hex wrenches, pliers, screwdrivers, metric wrenches, and a spark plug wrench.  Jackpot.  Honda quit putting full tool kits in their bikes in 2006 so I wasn’t even thinking about finding a whole kit in the Suzuki either. 

Now to see if I can get it all crammed back into that little storage compartment!

Weekend progress

I didn’t get everything done that I had planned but I made good progress.  You always find that one thing that you think will take 5 minutes and instead takes 30.

Here’s what my to-do list looked like.

    * Sliders - Done
    * Snake Skins - Too cold
    * Oil/Filter change - Done
    * Coolant change - Waiting until next weekend
    * Brake fluid change - Done
    * 3M headlight film/covers - No time, will do one evening this week
    * Clean and check the chain - Done
    * Overall cleaning - Nope
    * Put on the new license plate. - Done

Better than 50% aint too bad.  The leftovers are pretty easy anyway.  And in cleaning the chain and surrounding area, I found some parts that I thought were black but were instead just dirty and really bare aluminum.

I’d write more, but it’s getting late and I have to get up early tomorrow.

More stuff arrived

I received my 3M film for the headlight covers today.  As an added surprise I also got my license plate in the mail today too.  I like working with smaller dealers from out of town.  Everything is so quick.  Now just waiting on the title.

I also just made another purchase.  Somebody on the svrider.com forums was selling a rear hugger from their red 2007.  They’re putting a new swingarm on and the hugger won’t fit on it so he offered it up for sale.  I happened to be loading the forums right after he posted it and I sent a message just a couple of minutes before somebody else did so I got it.  It has one tiny scratch that should barely be visible.  Including covering the shipping cost, I got it for half the price of a new part from Suzuki.  I was wanting to eventually get one for the bike, so I’m happy to have stumbled across this one.  What luck.

I also swung by Honda of Houston and picked up 3 quarts of oil and a half gallon of Engine Ice. I’m glad the SV only uses 1.9 quarts of coolant because that stuff is expensive!